公司产品
诸暨和创电机科技有限公司
联系人:刘经理
手机:15968565201(微信同号)
手机:18072201129
QQ:648794605
邮箱:648794605@qq.com
地址:浙江省绍兴市诸暨市浙江省绍兴市诸暨市陶朱街道文种路15号

磁性吸盘

磁性吸盘
  永磁永磁吸盘是机械厂,模具厂等机加工领域广泛应用的磁性夹具,可以提高导磁性钢铁材料装夹效率。永磁吸盘是以高性能的稀土材料钕铁硼为内核,永磁同步电机通过扳动吸盘手柄转动,来改变吸盘内部钕铁硼的磁力系统,使得被加工工件达到吸持或释放效果。

  Permanent magnetic chuck is the magnetic clamp that widely used in the field of machinery factory,mold factory.It can improve the efficiency of magnet conductivity of the magnetic clamping steel material.Permanent magnetic chuck is a high performance ndfeb rare earth materials as the kernel,by hand pull(chuck rotates,thereby change the suction cup internal ndfeb magnetic system,achieves the processed workpiece holding or release.

Round PermanentMagnetic   Chuck
圆形永磁吸盘
Item CodeDiameterEffective LengthHeightpole PitchD2KNMD3
PMCC-150150117501+3110448132
PMCC-160160129501+31204410140
PMCC-200200169521+31604410180
PMCC-250250213521+32004410230
PMCC-300300265541+32504412280
PMCC-400400365581+33204412380
PMCC-600600553621+35004412580

  特点:

  1.产品体积更小,起重吊装力更强,且磁力恒久不衰。

  2.永磁吸盘不用电即可使用,省去供电麻烦。

  3.永磁吸盘优化的磁路设计,使剩磁几乎为零。

  4.永磁吸盘专业设计的外观造型使产品更加美观。

  Features:

  Small volume,strong lifting force,lasting magnetic.

  2.No electrinic needed.

  3.Optimized magnetic circuit design,full use of magnetism.

  4.Professional design makes the product artistic.

  原理:

  永磁吸盘是利用磁通的连续性原理及磁场的叠加原理设计的,永磁吸盘的磁路设计成多个磁系,通过磁系的相对运动,实现工作磁极面上磁场强度的相加或相消,从而达到吸持和卸载的目的。

  Principle:

  Continuity principle of permanent magnetic chuck is the using of magnetic flux and the superposition principle of the magnetic field design.Permanent-magnetic chuck designs multiple magnetic circuit of magnetic system,through the relative movemeng of magnetic system,to implement magnetic field intensity on the work magnetic pole surface,so that can holding or unload the products.   

  操作:

  1.将工件摆放到吸盘工作台面上,然后将扳手插入轴孔内沿顺时针方向转动180到”ON”,即可吸住工件进行加工.

  2.工件加工完毕,再将扳手插入轴孔内沿逆时针转动180到”OFF”,即可取下工件.

  Operation:

  1.Put the workpiece on the surface,then use the wrench into the hole to rotate with the degree of 180 clockwise,remove to the position of"ON",at this time the permagnet magnetic chuck can holding the workpiece.

  2.When it finished,rotating the wrench with the degree of 180 anticlockwise remove to the position of"OFF".

  维护保养:

  1.吸盘使用前应擦干净表面以免划伤影响精度.

  2.使用环境温度在-40C--50C,严禁敲击,以防磁力降低.

  3.用完后工作面涂防锈油,乙方锈蚀。

  Maintaining:

  1.Before using the chuck should clean surface to avoid scratches affect accuracy.

  2.Using temperature in-40-50℃,avoid knocking to reduce the magnetism.

  3.Smearing the oil on the surface after using permanent magnet chuck.